- Out-of-Stock

The QUICKMOV surge diverter is designed to provide point-of-entry protection against surge transients for services rated at 100A or greater. The unit is intended for installation at the M.E.N. point, or to be used in conjunction with an SPD50NGi Neutral-Earth protector in non-M.E.N. locations (contact Eaton Powerware for details). One QUICKMOV per phase is required for multi-phase installations.
Due to inbuilt protection mechanisms, no external fuse or circuit breaker is required. In fact, no other parts, apart from the Quickmov itself are required for installation - the unit simply installs like a standard QUICKLAG device, except with the free terminal being replaced with a short length of cable. This cable is connected to the Neutral bar of the switchboard.
The QUICKMOV has been designed in accordance with AS3100, ANSI-IEEE C62.41, IEC61643-1, IEC61000-6-1, 2, 3, 4 and other standards and codes as applicable.
Product Type | Surge Suppressor/Protector |
Manufacturer Part Number | SPDQM1 |
Manufacturer Website Address | http://www.eatoncorp.com.au |
Manufacturer | Eaton Corporation |
Product Model | SPDQM1 |
Product Name | Quickmov SPDQM1 Surge Suppressor |
Product Line | Quickmov |
Brand Name | Powerware |
Input Voltage | 250 V AC |
440 V AC | |
Output Voltage | 440 V AC |
250 V AC | |
Surge Energy Rating | 800 J |
Maximum Surge Current | 60 kA |
Additional Information | Residual voltage (Vpl) @ 3kA: 1.1kV (cable trimmed to 250mm) |
Maximum Continuous Over Voltage (MCOV): 300VAC | |
Surge current rating In (20 times): 30kA (8/20us) | |
Temporary Over Voltage (TOV) (5s): 330VAC | |
Compatibility | Powerware Cutler-Hammer Quicklag-style Switchboard |
Powerware SPD50NGi Surge Protector | |
Computer System | |
UPS | |
Country of Origin | Australia |
Weight (Approximate) | 310 g |
Height | 93 mm |
Width | 25 mm |
Depth | 71 mm |
Limited Warranty | 1 Year |